Structure of Molybdenum Sputtering Target for Solar Cell
Modern solar cells are based on semiconductor physics -- they are basically just P-N junction photodiodes with a very large light-sensitive area. The photovoltaic effect, which causes the cell to convert light directly into electrical energy, occurs in the three energy-conversion layers.
The first of these three layers necessary for energy conversion in a solar cell is the top junction layer (made of N-type semiconductor). The next layer in the structure is the core of the device; this is the absorber layer (the P-N junction). The last of the energy-conversion layers is the back junction layer (made of P-type semiconductor).
As may be seen in the above diagram, there are two additional layers that must be present in a solar cell. These are the electrical contact layers. There must obviously be two such layers to allow electric current to flow out of and into the cell. The electrical contact layer on the face of the cell where light enters is generally present in some grid pattern and is composed of a good conductor such as a metal. The grid pattern does not cover the entire face of the cell since grid materials, though good electrical conductors are generally not transparent to light. Hence, the grid pattern must be widely spaced to allow light to enter the solar cell but not to the extent that the electrical contact layer will have difficulty collecting the current produced by the cell. The back electrical contact layer has no such diametrically opposed restrictions. It need simply function as an electrical contact and thus covers the entire back surface of the cell structure. Because the back layer must be a very good electrical conductor, it is always made of metal.
Our metals contribute to the performance of photovoltaics and solar thermal applications as coating materials. They are highly adhesive and resistant against corrosion and oxidation. Thin films made of molybdenum are reflective, very conductive, and can significantly increase the efficiency of solar cells.
Using molybdenum sputtering target as material have the properties of low thermal expansion, and high corrosion resistance.
免責聲明：上文僅代表作者或發布者觀點，與本站無關。本站并無義務對其原創性及內容加以證實。對本文全部或者部分內容(文字或圖片)的真實性、完整性本站不作任何保證或承諾，請讀者參考時自行核實相關內容。本站制作、轉載、同意會員發布上述內容僅出于傳遞更多信息之目的，但不表明本站認可、同意或贊同其觀點。上述內容僅供參考，不構成投資決策之建議；投資者據此操作，風險自擔。如對上述內容有任何異議，請聯系相關作者或與本站站長聯系，本站將盡可能協助處理有關事宜。謝謝訪問與合作！ 中鎢在線采集制作.
|
